Close

You’re shopping from: United States of America

Best sellers

Dew heater for 200mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 200mm diameter telescopes

PrimaLuceLab
PLLFAS200
$99.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 200mm diameter telescopes can be easily...
View
Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
ESATTO 3,5" LP

Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP

PL3600363
$150.00
Be the first to review this product
Adapter from M98 to M68 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M68 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
M110 35mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PrimaLuceLab
PL3600325
$126.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
View
SESTO SENSO 2 37mm adapter|SESTO SENSO|Primalucelab en
SESTO SENSO

SESTO SENSO 2 37mm adapter

SESTOSENSO-AD37II
$120.00
Be the first to review this product
This 37mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers with...
View
Side by side Losmandy plate 350mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
Side by side plates

Side by side Losmandy plate 350mm PLUS large dovetail clamps

PLLPDLOS350PL_
$426.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
GIOTTO 120 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
GIOTTO+ALTO bundles

GIOTTO 120 with ALTO-1 telescope cover motor

PLLGIOTTO120ALTO1
$863.00
Be the first to review this product
This bundle includes GIOTTO 120 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
PLUS dovetail clamp with 1 Kg counterweight|Dovetail clamp|Primalucelab en
  • Pack
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
$128.00
Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
View
Losmandy style dovetail plate 915mm PLUS|Dovetail bars|Primalucelab en
  • New
Dovetail bars

Losmandy style dovetail plate 915mm PLUS

PLLLOS915P
$275.00
Be the first to review this product
The Losmandy style dovetail plate 915mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 915mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 915mm PLUS Losmandy style dovetail plate can...
View
Adapter from M60 to M54 with stop ring for ESATTO 2” LP|ESATTO 2" LP|Primalucelab en
ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547
$150.00
Be the first to review this product
Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
ESATTO 2" LP focuser with ARCO 2" rotator|ESATTO 2" LP|Primalucelab en
  • Pack
ESATTO 2" LP

ESATTO 2" LP focuser with ARCO 2" rotator

PLLEST2LPARCO2
$1,873.00
Be the first to review this product
This bundle includes the ESATTO 2" LP low profile focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 54.2mm of thickness and 50.9mm of free aperture.
View
Cable Locking Clip (CLC) for GIOTTO|Spare parts|Primalucelab en
Spare parts

Cable Locking Clip (CLC) for GIOTTO

PLLGIOTTOLOCK
$7.00
Be the first to review this product
This Cable Locking Clip (CLC) for GIOTTO allows you to lock to GIOTTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also order this as spare part if needed.
View
GIOTTO 185 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
GIOTTO flat field generators

GIOTTO 185 Smart Flat Field Generator

PLLGIOTTO185
$408.00
Be the first to review this product
GIOTTO 185 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 185mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
Adapter from M110 to M92 female for ESATTO 4"|ESATTO 4”|Primalucelab en
ESATTO 4”

Adapter from M110 to M92 female for ESATTO 4"

PL3600316
$186.00
Be the first to review this product
Adapter from M110 to M92 female for ESATTO 4" converts M110x1 thread of the ESATTO 4" draw tube into a M92x1 female thread that is the same of the Takahashi original focuser. This way you can connect to ESATTO 4" the Takahashi photographic adapters.
View
Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5|ESATTO 2"|Primalucelab en
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

PL3600237
$198.00
Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
View
Guide scope support for ECCO|ECCO|Primalucelab en
ECCO

Guide scope support for ECCO

ECCOSUP
$89.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
View
Big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5|Dovetail clamp|Primalucelab en
  • Pack
Dovetail clamps

Big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5

PLLMORVLPB-AZEQ5_
$209.00
Be the first to review this product
The big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the AZ-EQ5 type mount. Thus you will have a better connection than the original AZ-EQ5 offering greater stability and...
View
GIOTTO for Origin, Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
  • New
GIOTTO flat field generators

GIOTTO for Origin, Smart Flat Field Generator

PLLGIOTTORG6
$365.00
Be the first to review this product
GIOTTO for Origin is an intelligent flat field generator specifically designed for Celestron Origin telescopes, enabling precise flat field calibration with the smart telescope. This ensures that if you rotate the Origin camera to better frame your target, or when new cameras become available in the future, you can easily capture a new flat-frame image....
View
GIOTTO 150 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
GIOTTO+ALTO bundles

GIOTTO 150 with ALTO-1 telescope cover motor

PLLGIOTTO150ALTO1
$908.00
Be the first to review this product
This bundle includes GIOTTO 150 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
ESATTO 3" focuser with ARCO 3" rotator|ESATTO 3”|Primalucelab en
  • Pack
ESATTO 3”

ESATTO 3" focuser with ARCO 3" rotator

PLLEST3ARCO3
$2,622.00
Be the first to review this product
This bundle includes the ESATTO 3" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 86.5mm of thickness and 76.3mm of free aperture.
View
105mm PLUS support rings|Support rings|Primalucelab en
Support rings

105mm PLUS support rings

PLLANSU105P
$290.00
Be the first to review this product
The 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these...
View
Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A port|EAGLE-type power cables|Primalucelab
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A...

PL1000017
$49.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
View
GIOTTO 220 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
GIOTTO flat field generators

GIOTTO 220 Smart Flat Field Generator

PLLGIOTTO220
$488.00
Be the first to review this product
GIOTTO 220 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 220mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
Flexible bushing for SESTO SENSO 2|Spare parts|Primalucelab en
Spare parts

Flexible bushing for SESTO SENSO 2

PL3600119
$21.00
Be the first to review this product
This flexible bushing connects the SESTO SENSO 2 motor to one of the red, black, blue, green, grey or yellow bushings for different focusers. This flexible bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This flexible bushing is not compatible with SESTO SENSO first generation.
View
GIOTTO 285 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
GIOTTO flat field generators

GIOTTO 285 Smart Flat Field Generator

PLLGIOTTO285
$779.00
Be the first to review this product
GIOTTO 285 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 285mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5|ESATTO 2"|Primalucelab en
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5

PL3600229
$198.00
Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
View
Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A

PrimaLuceLab
PL1000055
$44.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with...
View
Eagle-compatible power cable for accessories with cigarette plug - 30cm - 3A|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 3A

PrimaLuceLab
PL1000019
$44.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug with screw to...
View
Eagle-compatible power Y cable for 8A port|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power Y cable for 8A port

PL1000048
$66.00
Be the first to review this product
This "Eagle-compatible power Y cable for 8A port" connects to 8A 12V power out port of the EAGLE and provides you 2 power out ports (with 8A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current  will be 8A (and not 16A).
View
Eagle-compatible power Y cable for 3A port|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power Y cable for 3A port

PL1000047
$66.00
Be the first to review this product
This "Eagle-compatible power Y cable for 3A port" connects to 3A 12V power out port of the EAGLE and provides you 2 power out ports (with 3A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 3A (and not 6A).
View
Adapter ESATTO 2" LP for ARCO 2"|ARCO 2"|Primalucelab en
ARCO 2"

Adapter ESATTO 2" LP for ARCO 2"

PL3600538
$114.00
Be the first to review this product
Adapter ESATTO 2" LP for ARCO 2" allows you to connect the rotator to ESATTO 2" LP robotic focuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 22mm.
View
M110 10mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
ESATTO 4”

M110 10mm extension tube for ESATTO 4"

PL3600376
$126.00
Be the first to review this product
The M110 10mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 10mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
View
ARCO rotator port cable - 690mm long|Spare parts|Primalucelab en
Spare parts

ARCO rotator port cable - 690mm long

PL3600422
$15.00
Be the first to review this product
The ARCO rotator port cable - 690mm long is included in the ARCO package but you can also order it as spare part if needed. This cable connects rotator port of ARCO to ESATTO or SESTO SENSO 2. Since this is the longer cable provided within ARCO package, it's che cable we suggest to connect ARCO to SESTO SENSO 2.
View
3" visual back for ESATTO 3" and ARCO 3"|ESATTO 3”|Primalucelab en
ESATTO 3”

3" visual back for ESATTO 3" and ARCO 3"

PL8410010
$122.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" . This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories.
View
Red color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
Spare parts

Red color bushing for SESTO SENSO 2

PrimaLuceLab
PL3600116A
$11.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This red color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
View