Close

You’re shopping from: United States of America

Best sellers

85mm PLUS support rings|Support rings|Primalucelab en
Support rings

85mm PLUS support rings

PLLANSU85P
$241.00
Be the first to review this product
85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. Like all the other...
View
235mm PLUS support rings|Support rings|Primalucelab en
Support rings

235mm PLUS support rings

PLLANSU235P
$588.00
Be the first to review this product
235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...
View
Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A port|EAGLE-type power cables|Primalucelab
  • Not available
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A...

PL1000037
$55.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...
View
C82 pier for concrete base|Tripods and piers|Primalucelab en
  • Pack
Tripods and piers

C82 pier for concrete base

C82-C-B
$890.00
Be the first to review this product
When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed on the mount touches the tripod. Using the pier, you can safely use your instrument! This pier can be used with optional adapters for EQ6 / EQ6-R / AZ-EQ6 / CGEM...
View
Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A

PL1000015
$50.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...
View
T2-50,8mm photographic adapter|Photographic adapters|Primalucelab en
Photographic adapters

T2-50,8mm photographic adapter

PL3304226
$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...
View
Adapter ESATTO 2" for Takahashi telescopes with M72 thread|ESATTO 2"|Primalucelab en
ESATTO 2"

Adapter ESATTO 2" for Takahashi telescopes with M72 thread

PL3600244
$55.00
Be the first to review this product
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus. By adding the M71/M72 adapter, you can connect it also to the Takahashi Mewlon...
View
Eagle power cable with Anderson connector with 16A fuse- 250cm|EAGLE|Primalucelab en

Eagle power cable with Anderson connector with 16A fuse- 250cm

PL10000AND
$66.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse to...
View
Side by side Losmandy plate 350mm PLUS|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 350mm PLUS

PLLPDLOS350P_
$254.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Side by side Losmandy plate 240mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 240mm PLUS large dovetail clamps

PLLPDLOS240PL_
$409.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Eagle-compatible power cable for FLI camera - 115cm 8A|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable for FLI camera - 115cm 8A

PL1000002
$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.
View
EAGLE6 computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
  • Not available
EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6
$1,450.00
Be the first to review this product
EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...
View
GIOTTO 255 with ALTO-2 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
  • Not available
GIOTTO+ALTO bundles

GIOTTO 255 with ALTO-2 telescope cover motor

PLLGIOTTO255ALTO2
$1,222.00
Be the first to review this product
This bundle includes GIOTTO 255 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
GIOTTO 220 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
  • Not available
GIOTTO+ALTO bundles

GIOTTO 220 with ALTO-1 telescope cover motor

PLLGIOTTO220ALTO1
$1,043.00
Be the first to review this product
This bundle includes GIOTTO 220 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
GIOTTO 185 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
  • Not available
GIOTTO+ALTO bundles

GIOTTO 185 with ALTO-1 telescope cover motor

PLLGIOTTO185ALTO1
$963.00
Be the first to review this product
This bundle includes GIOTTO 185 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
Cable Locking Clip (CLC) for ALTO|Spare parts|Primalucelab en
  • Not available
Spare parts

Cable Locking Clip (CLC) for ALTO

PLLALTOLOCK
$9.00
Be the first to review this product
This Cable Locking Clip (CLC) for ALTO allows you to lock to ALTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also order this as spare part if needed.
View
ALTO-2 telescope cover motor for GIOTTO up to 320mm|ALTO telescope cover motor|Primalucelab en
  • Not available
ALTO telescope cover motor

ALTO-2 telescope cover motor for GIOTTO up to 320mm

PLLALTO2
$667.00
Be the first to review this product
ALTO-2 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 320mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...
View
WiFi antennas for EAGLE|Spare parts|Primalucelab en
Spare parts

WiFi antennas for EAGLE

PL3600087
$28.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.
View
C120 pier for concrete base|Tripods and piers|Primalucelab en
  • Pack
Tripods and piers

C120 pier for concrete base

C120-C-B
$1,499.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high stability and needs for less space. A pier also prevent the telescope to touch the tripod legs during movements! This pier is available also with different...
View
Adapter ESATTO 2" for Takahashi FS-60Q|ESATTO 2"|Primalucelab en
ESATTO 2"

Adapter ESATTO 2" for Takahashi FS-60Q

PL3600255
$174.00
Be the first to review this product
If you are searching for the most precise motorized focuser for Takahashi FS-60Q, this adapter allows you to connect ESATTO 2" to this telescope. Optical thickness is 5mm. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.
View
9mm T2 extension|Photographic adapters|Primalucelab en
Photographic adapters

9mm T2 extension

PL3304209
$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...
View
150mm PLUS support rings|Support rings|Primalucelab en
Support rings

150mm PLUS support rings

PLLANSU150P
$398.00
Be the first to review this product
150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...
View
EAGLE6 XTM computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
  • Not available
EAGLE

EAGLE6 XTM computer for telescopes and astrophotography

EAGLE6XTM
$3,355.00
Be the first to review this product
EAGLE6 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast i7 processor, Industrial Grade 32 GB fast DDR4 RAM memory, huge Industrial Grade 2TB SSD drive (NVMe) and Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. It's the perfect solution even for the...
View
EAGLE6 PRO computer for telescopes and astrophotography|EAGLE|Primalucelab en
  • New
  • Not available
EAGLE

EAGLE6 PRO computer for telescopes and astrophotography

EAGLE6PRO
$2,570.00
Be the first to review this product
EAGLE6 PRO is the computer for telescopes and astrophotography that provides top-class performance thanks to fast i5 processor, Industrial Grade 16 GB fast DDR4 RAM memory, large and fast Industrial Grade 512 GB SSD drive (NVMe), Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. All in a...
View
Adapter ESATTO 4" for ARCO 3", only for FSQ106|ARCO 3"|Primalucelab en
ARCO 3"

Adapter ESATTO 4" for ARCO 3", only for FSQ106

PL3600469
$145.00
Be the first to review this product
In order to prevent the ARCO 3" rotator to touch the internal field flattener of FSQ-106 telescope, we designed this special version of adapter that allows you to connect the ARCO 3" rotator to ESATTO 4" focuser, when installed on the FSQ-106. This adapter optical thickness is 10,5mm so, by adding it to ARCO 3", rotator optical thickness becomes 33,5mm....
View
GIOTTO 320 Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
  • Not available
GIOTTO flat field generators

GIOTTO 320 Smart Flat Field Generator

PLLGIOTTO320
$1,115.00
Be the first to review this product
GIOTTO 320 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 320mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
Adapter ESATTO 3.5" LP for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches|ESATTO 3,5" LP|Primalucelab en
ESATTO 3,5" LP

Adapter ESATTO 3.5" LP for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

PL3600367
$150.00
Be the first to review this product
If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 3,5" LP to the M117 thread of these telescope. Based on the camera and imaging train you want to connect, you may need...
View
7mm T2 extension|Photographic adapters|Primalucelab en
Photographic adapters

7mm T2 extension

PL3304207
$23.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...
View
Adapter ESATTO 4" for Takahashi FSQ-106|ESATTO 4”|Primalucelab en
ESATTO 4”

Adapter ESATTO 4" for Takahashi FSQ-106

PL3600310
$198.00
Be the first to review this product
Adapter ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the original focuser in order to allow you to reach focus with the telescope. Not compatible with FSQ-106EDX 3 and 4.
View
Dew heater for 280mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 280mm diameter telescopes

PLLFAS280
$112.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 280mm diameter telescopes can be easily...
View
Side by side Losmandy plate 240mm PLUS|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_
$237.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Side by side Losmandy plate 495mm PLUS maxi dovetail clamps|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 495mm PLUS maxi dovetail clamps

PLLPDLOS495PM_
$566.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Dew heater for 300mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 300mm diameter telescopes

PLLFAS300
$122.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 300mm diameter telescopes can be easily...
View
12V power cable with banana plugs for Eagle - 250cm|EAGLE|Primalucelab en

12V power cable with banana plugs for Eagle - 250cm

PL1000028
$54.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connector.
View