"PLUS curved blocks for Celestron C8,...

FAST SHIPPING with express courier

"PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8"""

PLLSAG925

If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm Losmandy PLUS dovetail bar on the telescope.


$69.00
MSRP
 

The PLUS curved blocks can be easily installed on Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescopes. Simply remove the screws already on the telescope and fix the curved blocks (one in front, one in rear of the optical tube) and secure with the same screws. On the curved blocks you can then connect the 350mm or 495mm PLUS Losmandy dovetail bar using 2 M6 screws for each curved block (included in the box).

PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8

Reviews

1 Reviews

Losmandy style PLUS dovetail plate with curved blocks for C9.25,
Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11 e RASA 8, can also be used on a Meade 2080/LX 5 Optical Tube Assembly
The screw position on the OTA match with this set.
A good start to refresh an old configuration.
Those version of the Meade 8" series has been shipped in the 80's before the release of LX200 series.
High qualtty of the packaging

Best regards
on

You might also like