Close

You’re shopping from: United States of America

Home

Celestron EdgeHD 8" with Losmandy bar and ESATTO 2" LP|Aplanatic Schmidt-Cassegrain|Primalucelab en
  • Pack
Aplanatic Schmidt-Cassegrain

Celestron EdgeHD 8" with Losmandy bar and ESATTO 2" LP

CE91030-XLTEST2_
Be the first to review this product
Celestron EdgeHD 8" telescope with Losmandy bar is a compact aplanatic Schmidt-Cassegrain telescope 203mm f/10 that, thanks to the ESATTO 2" LP low profile focuser, becomes excellent for any application! It's perfect also for remote control since the ESATTO allows you to focus even with the primary mirror locked to eliminate image shift.
View
Celestron C8-XLT with dovetail Vixen type and ESATTO 2"|Schmidt-Cassegrain|Primalucelab en
  • Pack
Schmidt-Cassegrain

Celestron C8-XLT with dovetail Vixen type and ESATTO 2"

CE91020-XLTEST2_
Be the first to review this product
Celestron C8-XLT with dovetail Vixen type, one of the most used telescopes in the world, is now more precise thanks to the ESATTO 2" robotic microfocuser that eliminates the image shift typical of Schmidt-Cassegrains! This telescope is 203mm in diameter (f/10) and it's compact, lightweight and easy to collimate.
View
2" visual back for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
ESATTO 2"

2" visual back for ESATTO 2" and ARCO 2"

PL8410001
$102.00
Be the first to review this product
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...
View
Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PL1000045
$44.00
Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.
View
EAGLE type connector for power IN and 5A or 8A power OUT ports|Spare parts|Primalucelab en
EAGLE-type power cables

EAGLE type connector for power IN and 5A or 8A power OUT ports

PL1000035
$18.00
Be the first to review this product
EAGLE type connector for power IN and 5A or 8A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
View
Side by side Losmandy plate 240mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 240mm PLUS large dovetail clamps

PLLPDLOS240PL_
$409.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Vixen style dovetail plate 350mm PLUS|Dovetail bars|Primalucelab en
Dovetail bars

Vixen style dovetail plate 350mm PLUS

PLLVIX350P
$89.00
Be the first to review this product
The Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 350mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...
View
DX finder base|Optical finders|Primalucelab en
Optical finders

DX finder base

PLLBACEDX
$32.00
Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
View
Dew heater for 100mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 100mm diameter telescopes

PLLFAS100
$67.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 100mm diameter telescopes can be...
View
95mm PLUS support rings|Support rings|Primalucelab en
Support rings

95mm PLUS support rings

PLLANSU95P
$264.00
2 Reviews
The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL. Like all the other...
View
ESATTO + ARCO Base Kit for...
  • New
  • Pack
Telescope kits

ESATTO + ARCO Base Kit for CPC Deluxe HD 8”, 9.25" and 11"

EABKCPCHD811
$2,189.00
Be the first to review this product
The ESATTO + ARCO Base Kit for CPC Deluxe HD 8”, 9.25" and 11" includes the ESATTO 2" LP low profile robotic focuser and the ARCO 2" rotator with all the adapters you need to connect them to your CPC Deluxe HD 8”, 9.25" and 11" telescopes. Compared to the SESTO SENSO + ARCO Base Kit, this kit replaces the internal focus mechanism of the telescope with a...
View