Close

You’re shopping from: United States of America

Home

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A|EAGLE-type power cables|Primalucelab en
EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A

PL1000055
$44.00
Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with...
View
Side by side Losmandy plate 350mm PLUS|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 350mm PLUS

PLLPDLOS350P_
$254.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Temperature sensor for ECCO, SESTO SENSO and ESATTO|ESATTO 2"|Primalucelab en
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP
$30.00
Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
View
Dew heater for 120mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 120mm diameter telescopes

PLLFAS120
$73.00
Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 120mm diameter telescopes can be easily...
View
100mm PLUS support rings|Support rings|Primalucelab en
Support rings

100mm PLUS support rings

PLLANSU100P
$275.00
Be the first to review this product
The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS...
View
Losmandy style dovetail plate 140mm PLUS|Dovetail bars|Primalucelab en
Dovetail bars

Losmandy style dovetail plate 140mm PLUS

PLLLOS140P
$55.00
1 Reviews
The Losmandy style dovetail plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Losmandy plate (as the SkyWatcher SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...
View
EAGLE expansion kit for CPC...
  • New
  • Pack
Telescope kits

EAGLE expansion kit for CPC Deluxe HD 8”

EEKCPCHD8
$3,092.00
Be the first to review this product
The “EAGLE expansion kit for CPC Deluxe HD 8” is for those who want to take their CPC Deluxe HD 8" powered by PrimaLuceLab to the next level. It adds the EAGLE computer, which eliminates the need for an external PC, improves cable and power management, and adds to the setup a guide telescope, mechanical adapters for installation and weight balance and...
View
Camera support for SESTO...
  • New
  • Not available
SESTO SENSO

Camera support for SESTO SENSO 3 LS

PL8410094
$159.00
Be the first to review this product
The Camera support for SESTO SENSO 3 LS is an optional mounting accessory designed to enable correct installation of the SESTO SENSO 3 LS focusing motor when the telephoto lens is not equipped with an integrated L-shaped tripod collar. The Lens Gear Clamp (LGC) system of SESTO SENSO 3 LS has been engineered assuming the presence of a lower support...
View
Adapter from M98 to M54 with stop ring for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
ESATTO 3,5" LP

Adapter from M98 to M54 with stop ring for ESATTO 3,5” LP

PL3600387
$145.00
Be the first to review this product
Adapter from M98 to M54 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M54 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
Wind sensor for SPIDER MarkII and INTREPID|Accessories for radio telescopes|Primalucelab en
  • Not available
Accessories for radio telescopes

Wind sensor for SPIDER MarkII and INTREPID

WIND-S
$2,379.00
Be the first to review this product
Wind sensor for SPIDER MarkII radio telescopes allows to continuously read the wind speed for safety: this way, if the wind speed exceeds the safety speed, the antenna is automatically moved pointing the Zenith, in a safe position, thus reducing the wind load on the antenna.
View
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread|ESATTO 2" LP|Primalucelab en
ESATTO 2" LP

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread

PL3600539
$114.00
Be the first to review this product
Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO 2" LP has an optical thickness of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also...
View