The 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
Are you interested in radio astronomy? Do you want to know how do radio telescopes work? This book will allow you to discover the amazing world of the Universe that our eyes cannot see but that we can study with radio techniques. Author Filippo Bradaschia (co-founder of PrimaLuceLab) explains the different themes of this science in a simple and...
M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. PL3600427 adapter adds 1mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600427) becomes 21mm.
Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3" allows you to connect any camera or accessory with M65 female thread. Just thread this adapter to the M81 thread of ESATTO 3" or ARCO 3". Thanks to the M65 stop ring you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object. Optical...
This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.
Adapter ESATTO 4" for ARCO 3" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.
Adapter from M81 to T2 with stop ring for ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the T2 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and accessories...
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics.
This dew heater for 180mm diameter telescopes can be easily...
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens.
This...
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens.
This...
DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the Eagle (also Eagle Core) in place of the battery.