Close

You’re shopping from: United States of America

Best sellers

Dew heater for 200mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 200mm diameter telescopes

PLLFAS200
$99.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 200mm diameter telescopes can be easily...
View
Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP|ESATTO 3,5" LP|Primalucelab en
ESATTO 3,5" LP

Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP

PL3600363
$150.00
Be the first to review this product
Adapter from M98 to M68 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M68 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
M110 35mm extension tube for ESATTO 4"|ESATTO 4”|Primalucelab en
ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PL3600325
$126.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
View
SESTO SENSO 2 37mm adapter|SESTO SENSO|Primalucelab en
SESTO SENSO

SESTO SENSO 2 37mm adapter

SESTOSENSO-AD37II
$120.00
Be the first to review this product
This 37mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers with...
View
Side by side Losmandy plate 350mm PLUS large dovetail clamps|Side by side plates|Primalucelab en
  • Pack
  • Not available
Side by side plates

Side by side Losmandy plate 350mm PLUS large dovetail clamps

PLLPDLOS350PL_
$426.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
GIOTTO 120 with ALTO-1 telescope cover motor|GIOTTO+ALTO bundles|Primalucelab en
  • Pack
  • Not available
GIOTTO+ALTO bundles

GIOTTO 120 with ALTO-1 telescope cover motor

PLLGIOTTO120ALTO1
$863.00
Be the first to review this product
This bundle includes GIOTTO 120 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
PLUS dovetail clamp with 1 Kg counterweight|Dovetail clamp|Primalucelab en
  • Pack
  • Not available
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
$128.00
Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
View
GIOTTO for Origin, Smart Flat Field Generator|GIOTTO flat field generators|Primalucelab en
  • New
  • Not available
GIOTTO flat field generators

GIOTTO for Origin, Smart Flat Field Generator

PLLGIOTTORG6
$365.00
Be the first to review this product
GIOTTO for Origin is an intelligent flat field generator specifically designed for Celestron Origin telescopes, enabling precise flat field calibration with the smart telescope. This ensures that if you rotate the Origin camera to better frame your target, or when new cameras become available in the future, you can easily capture a new flat-frame image....
View
Losmandy style dovetail plate 915mm PLUS|Dovetail bars|Primalucelab en
  • New
  • Not available
Dovetail bars

Losmandy style dovetail plate 915mm PLUS

PLLLOS915P
$275.00
Be the first to review this product
The Losmandy style dovetail plate 915mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 915mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 915mm PLUS Losmandy style dovetail plate can...
View
Adapter from M60 to M54 with stop ring for ESATTO 2” LP|ESATTO 2" LP|Primalucelab en
ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547
$150.00
Be the first to review this product
Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View