Close

You’re shopping from: United States of America

Best sellers

M63x1 adapter for ARCO 3"|ARCO 3"|Primalucelab en
ARCO 3"

M63x1 adapter for ARCO 3"

PL3600465
$83.00
Be the first to review this product
M63x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 63x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. Optical thickness of PL3600465 adapter is 2mm.
View
Adapter from M110 to M68 with stop ring for ESATTO 4"|ESATTO 4”|Primalucelab en
ESATTO 4”

Adapter from M110 to M68 with stop ring for ESATTO 4"

PL3600312
$234.00
Be the first to review this product
Adapter from M110 to M68 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M68 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.
View
T2 spacer 0,5mm|Photographic adapters|Primalucelab en
Photographic adapters

T2 spacer 0,5mm

PL3304200
$14.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.
View
Adapter from M56 to M57 with stop ring for ESATTO 2" and ARCO 2"|ESATTO 2"|Primalucelab en
ESATTO 2"

Adapter from M56 to M57 with stop ring for ESATTO 2" and ARCO 2"

PL3600227
$114.00
Be the first to review this product
Adapter from M56 to M57 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M57x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" focuser draw tube. Thanks to the M57 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
Dew heater for 350mm diameter telescopes|Dew heaters|Primalucelab en
Dew heaters

Dew heater for 350mm diameter telescopes

PLLFAS350
$122.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 180mm diameter telescopes can be easily...
View
10mm M68 extension|Photographic adapters|Primalucelab en
Photographic adapters

10mm M68 extension

PL3306810
$56.00
Be the first to review this product
PrimaLuceLab M68 extension with 10mm thickness, it comes with M68x1 thread on both sides (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), this extension offers an external knurling for a better grip (very useful for example when screwing or unscrewing).
View
Adapter from M60 to T2 with stop ring for ESATTO 2” LP|ESATTO 2" LP|Primalucelab en
ESATTO 2" LP

Adapter from M60 to T2 with stop ring for ESATTO 2” LP

PL3600543
$150.00
Be the first to review this product
Adapter from M60 to T2 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the T2 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the...
View
Set 3 locking screws for GIOTTO|Spare parts|Primalucelab en
  • Not available
Spare parts

Set 3 locking screws for GIOTTO

PLLGIOTTOSCR
$14.00
Be the first to review this product
Set 3 locking screws for GIOTTO are already included in every GIOTTO box but you can also order them as spare part. These screws are used in order to fix GIOTTO smart flat field generator in front of your telescope.
View
Guide rings support plate for ECCO|ECCO|Primalucelab en
  • Not available
ECCO

Guide rings support plate for ECCO

ECCOSUP-PL
$26.00
Be the first to review this product
The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.
View
M65x1 adapter for ARCO 3"|ARCO 3"|Primalucelab en
ARCO 3"

M65x1 adapter for ARCO 3"

PL3600468
$83.00
Be the first to review this product
M65x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 65x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. Optical thickness of this adapter is 3.5mm.
View
244mm PLUS support rings|Support rings|Primalucelab en
Support rings

244mm PLUS support rings

PLLANSU244P
$734.00
Be the first to review this product
244mm PLUS support rings can be used with any brands telescopes (for example Takahashi Mewlon 210mm) with tube 244mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...
View
Yellow color bushing for SESTO SENSO 2|Spare parts|Primalucelab en
Spare parts

Yellow color bushing for SESTO SENSO 2

PL3600116F
$11.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This yellow color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 4.0mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
View
Adapter ESATTO 3" for ARCO 2"|ARCO 2"|Primalucelab en
Rotators

Adapter ESATTO 3" for ARCO 2"

PL3600416
$83.00
Be the first to review this product
Adapter ESATTO 3" for ARCO 2" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.
View
SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO|Newton reflectors|Primalucelab en
  • Pack
Newton reflectors

SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO

SKP2008IWP-FSS_
Be the first to review this product
SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO is 200mm f/4 telescope perfect for astrophotography, thanks also to advanced features of SESTO SENSO 2 motor. Low weight and dimensions make it perfect to use also with not too large mounts.
View
SkyWatcher Newton QUATTRO 254/1000 f3.9 with SESTO SENSO|Newton reflectors|Primalucelab en
  • Pack
Newton reflectors

SkyWatcher Newton QUATTRO 254/1000 f3.9 with SESTO SENSO

SKP2501IWP-FSS_
Be the first to review this product
SkyWatcher Newton QUATTRO 254/1000 f3.9 with SESTO SENSO is a 254mm diameter f/3.9 telescope, great for astrophotography, with the most advanced focusing control system. But you can use it also in visual thanks to the included Virtual HandPad of SESTO SENSO 2 that allows you to precisely focus without a computer.
View
Eagle-compatible power cable for Nikon D3100, D3200, D3300, D5100, D5200, D5300, D5500 3A|EAGLE-type power cables|Primalucelab e
EAGLE-type power cables

Eagle-compatible power cable for Nikon D3100, D3200, D3300, D5100, D5200, D5300, D5500 3A

PL1000007
$99.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the Eagle (also Eagle Core) in place of the battery.
View
145mm PLUS support rings|Support rings|Primalucelab en
Support rings

145mm PLUS support rings

PLLANSU145P
$387.00
Be the first to review this product
The 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
View
Black color bushing long for SESTO SENSO 2 adapters|Spare parts|Primalucelab en
Spare parts

Black color bushing long for SESTO SENSO 2 adapters

PL3600117
$18.00
Be the first to review this product
Black color bushing long is usually included in 33 or 37mm adapters that allow to connect SESTO SENSO 2 to focusers with shafts larger than 25mm. If you upgraded from SESTO SENSO first generation to SESTO SENSO 2 and you also have one of the first generation adapters, you can just order the "Black color bushing long for SESTO SENSO 2 adapters" and connect...
View
Adapter ESATTO 3,5" LP for telescopes with SC thread|ESATTO 3,5" LP|Primalucelab en
ESATTO 3,5" LP

Adapter ESATTO 3,5" LP for telescopes with SC thread

PL3600366
$114.00
Be the first to review this product
By adding this adapter, you can connect the ESATTO 3,5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.
View
Adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200|ESATTO 3,5" LP|Primalucelab en
  • Not available
ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200

PL3600365
$234.00
Be the first to review this product
The adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3,5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm. 
View