• New
QHYCCD QHY5III200M monochrome camera

FAST SHIPPING with express courier

QHYCCD QHY5III200M monochrome camera

QHY5III200M
QHY5III200M is a great mono planetary or guide camera with excellent quality and high sensitivity (also in near-infrared) thanks to the large 4um pixels. QHY5III200M is one of the new generation QHY5III V2 series cameras that provide USB 3.2 Type-C port and a standard ST4 autoguide port. It comes with 1920x1080 resolution mono sensor, 4um pixel size and 12-bit AD converter. QHY5III200M camera comes with an IR-Pass 850nm filter without cell.
$395.00
MSRP
 

QHY5III200M: 512MB DDR3 image buffer

The QHY5III (Ver. 2) series planetary and guiding cameras are all equipped with a 512MB DDR3 image buffer which can effectively reduce the pressure on computer transmission, a great help for planetary photography which often requires writing a large amount of data in a short period of time. Some deep-sky astrophotography cameras on the market today only have 256MB, for example. In comparison, the 512MB DDR3 memory of the new 5III (Ver. 2) series cameras represents a significant upgrade.

QHYCCD QHY5III200M monochrome camera

 

 

QHY5III200M: USB 3.2 Type C port, ST4 port and new front design

The new QHY5III (Ver.2) series cameras all use the USB3.2 Gen1 Type-C interface. Compared to the USB3.0 Type-B interface used in the previous generation, the Type-C interface has a longer life and is more flexible. Tips: It is recommended to use the official standard Type-C data cable of QHYCCD. Autoguide port custom interface of the previous generation of planetary cameras and guiders has been replaced in the QHY5III (Ver.2) cameras with a more universal ST-4 compatible guiding interface. Now, even if the guiding cable is lost or damaged, you will be able to easily get a replacement on the market at a low cost.

QHY5III (Ver. 2) series cameras have adopted a new front-end design with better compatibility. The new front end supports 1.25″ interface of telescopes and is also compatible with CS-port lenses and C-port lenses, and can shoot with C/CS-port lenses with filters attached.  A 1.25″ framed filter can be fitted with the front end, and a frameless filter can be fitted on the front part of the upper CMOS. The size of the filter glass that is compatible here varies depending on the size of the sensor, but is basically a standard lab filter specification. Compared to the more expensive astronomical filters, lab filters tend to be less expensive and have a wider variety of bands, allowing you to develop more uses and applications.

QHYCCD QHY5III200M monochrome camera

 

 

QHYCCD QHY5III200M monochrome camera - scope of delivery:

- QHY5III200M camera
- USB-C cable for PC connection

- ST4 standard cable for autoguide
- IR-pass frameless filter
- Parafocal ring

 

 

QHYCCD QHY5III200M monochrome camera

 

 

 QHYCCD planetary and autoguide CMOS cameras comparison

In this table we have summarized main features of QHYCCD's planetary and autoguide CMOS cameras to allow you to easily compare and choose the best one based on your telescope.

New product

Reviews

No reviews

You might also like